Scuba diving won’t be possible if not for the development of the open circuit scuba set, its peripherals and other related scuba gear that supports the diver in the conduct of multi-level dives. A PADI or NAUI-affiliated diving school can only give you as much instruction and training in terms of scuba equipment use. But it would take a few open dives plus good judgment on your part to take these gear to the road, realize the benefit potential of each device and enjoy the sport of scuba diving with the encounter of minor hitches only along the way. Find below a few general tips relevant to the use and application of scuba diving equipment.
Mounting Scuba Equipment
Don’t delegate this little chore to your diving buddy or with a resource person at the dive shop. Getting adept with the attachments and settings of particular scuba equipment such as connecting the O-ring valves of the cylinder tank to the first stage of the scuba regulator or strapping the tank to the buoyancy compensator device (BCD) increases your margin of safety during the dive. Know why? Since in the entire process of mounting scuba equipment, you will also be testing each separate unit just to see if these are working properly; making you confident that your scuba gear is in tip top condition for the dive. Assuming that you’ll get open water certified, then this won’t be a problem at all!
Mastery of Scuba Equipment Use
Being well-equipped with high performance scuba equipment you’ve properly installed prior to the dive surely won’t guarantee you of a seamless underwater experience. After all, you will have to be adept (not just learn) with the features and functions of pertinent scuba gear. Mastery of scuba equipment functionalities allow the diver to competently fine tune its settings (1) to support his vertical position on the water column by manipulating the buoyancy compensator device and weights or perhaps (2) to efficiently respond to eventualities such as a free flow, depletion of air reserves and a flooded diving mask.
Similarly, an in-depth understanding of decompression parameters when coupled by the smart application of displayed readings on related devices such as the dive computer, air gauge and pressure gauge not only heightens the diver’s safety margin but also allows him to engage in multi-level dives without compromising set decompression limits.
For the same volume of gas in the cylinder tank (say 3000 psi), a competent diver can cruise different points in the vertical column (instead of just lingering at the planned bottom) by sticking to No Decompression Limits (NDL) in order to dispense with the need for decompression stops upon ascent. Meanwhile, bottom times can be extended with the optimized use of air reserves that is possible through proper breathing techniques and adherence to the principles of neutral buoyancy.
Maintenance of Scuba Equipment
Don’t just dump your scuba gear after the dive. Learning the proper methods of cleaning and storing pertinent equipment such as the scuba regulator set, BCD and wetsuit will not only extend its useful life but also limits the risk of malfunction on your future dives.
Get your diving act together with the informed use of scuba equipment [http://www.scubasuppliers.com] and now you’re in for truly enjoyable diving experiences.